They are used as linear guides, for linear bearings or as guide pins. Perfectly processed, as the hardness is superficial.
The ground shafts are induction hardened from selected and rigorously controlled steels. The hardness and quality of the surfaces guarantee excellent conditions for the longitudinal movements of the bearings, supplied with tolerance, or according to the customer's design.
| Surface Hardness | 62 +/- 2 HRC |
| Gauges | From 04 to 120mm |
| Superficial Tolerance | h6 |
| Chemical Composition (CF53) [% by weight] | C: 0.5-0.57, Si: 0.15-0.35, Mn: 0.4-0.7, P: max. 0.025, S: max. 0.035 |
| Roughness | Ra < 0.2 µm |
| Tensile Strength (Rm) | 610 - 760 N/mm² |
| Material | Alloy steel Cf53 |
| Surface Heat Treatment | Partial induction tempering |
| Manufacturing process | Rectify |
| More information | For more information, contact our team. |
| Length | up to 6000mm |
| Quench Depth | The hard layer of the shaft is approximately 20% of the outer diameter of the item, as per ISO 13012 |
